A one piece wash bay that turns a medium van into a self-contained wheelie bin cleaning unit. Tip the bin in, pressure wash it out, and everything that comes off the bin goes into the tank underneath instead of onto your customer’s drive.
Built as one welded unit
The BW-500 is fabricated from 1050 grade aluminium and fully welded into a single piece. The wash chamber, waste tank and mounting feet are all one unit, so there are no separate tanks or frames to line up and no joints between them to leak. At around 74 kg, it leaves your payload for water.
Designed around how bin cleaners work
- Enclosed wash chamber: the bin lies on a sloped floor inside a three-sided hood, which keeps spray and dirty water inside the van.
- Low front sump: waste water and debris run down the floor and drop away from the bin, so nothing washes back onto it.
- Lift-out strainer tray: a single full-width tray catches the solids. Lift it out, tip it into a bag and drop it back in.
- 225 litre waste tank: the tank sits under the wash floor and is baffled to control water surge when you’re driving.
- Built-in tank flush: a four-nozzle manifold along the side connects to your pressure washer by a ½" BSP fitting, so you can wash the tank through at the end of the day.
- Two drain outlets: use whichever one suits the layout under your van.
- Fixing feet all round: slotted mounting feet on every side bolt the unit to the van floor.
Specification
| Material | 1050 aluminium, fully welded |
| Size | 1,340 mm long × 915 mm wide × 1,100 mm high |
| Weight | About 74 kg empty |
| Waste tank | 225 litres working capacity |
| Bin size | Designed around the standard 240 litre wheelie bin |
| Tank flush inlet | ½" BSP male |
| Fits | Vauxhall Vivaro, Peugeot Expert, Citroën Dispatch (L1) |
Want it ready to work?
The BW-500 is supplied as a bare unit. We can also supply and fit it at our Telford workshop with a pressure washer and clean water tank as a complete ready-to-go package. Get in touch for a price.

