- Houses per fill
- 18–203-bed semis
- Min. payload
- 600kg
Suits vans like
- Citroën Berlingo
- Renault Kangoo
- Peugeot Partner
- Ford Transit Connect
- Vauxhall Combo
- VW Caddy
- Mercedes Citan
Complete van-mounted window cleaning system
Cleanlynk FOUNDATION 500L Single Operator Van Mounted Water Fed Pole Window Cleaning System
£1,560.00£1,300.00Including VAT.Excluding VAT. Shipping calculated at checkout.
Which tank size fits my van?
Compare minimum van payload and houses per fill for each tank size.
Not sure what you need? Our team are working window cleaners.
6 months of RoundPro free
Every system includes 6 months of our round management app, worth £294.
Installation
We can fit your system at our headquarters in Telford (TF1 5ST). Fitting typically takes 6 to 8 hours, so you can drop your van off in the morning and collect it the same day. Call us to book a fitting slot.
12-MONTH WARRANTYON ALL COMPONENTS
UK SUPPORTMON–SAT, 7AM–6PM
BUILT BYREAL WINDOW CLEANERS
How it works
How your system works
A van-mounted water fed pole system in four simple stages.
-
Fill up
Fill your tank with pure water at a pure water filling station, at home or choose on-board RO/DI water purification.
-
Carry
A securely mounted pure water storage tank carries your day's water safely in the van.
-
Pump & control
A 12V water pump and pump controller deliver a steady flow you can adjust to suit the job.
-
Reel & clean
The hose reel feeds your water fed pole, so you're cleaning glass minutes after parking up.
Just starting out? For anyone seriously starting out in window cleaning, we generally recommend beginning with a basic cold water "delivery only" system like this one.
Included with every system
Run your round with RoundPro
Every van mounted system comes with 6 months of RoundPro free – our round management app built by Cleanlynk for UK window cleaners. Get your customers, cleans and payments organised from day one.
- Rounds and scheduling on your phone
- Card payments and Direct Debit
- Xero integration
- Built by working window cleaners
Discover RoundPro
We'll send your RoundPro activation details after your system order is placed.
Size guide
Which tank size is right for you?
The van you need depends on the size of the tank you choose. Use this as a guide, and always check your own van's payload before ordering.
- Houses per fill
- 22–253-bed semis
- Min. payload
- 800kg
Suits vans like
- Citroën Dispatch
- Renault Trafic
- Vauxhall Vivaro
- Ford Transit Custom
- Mercedes Vito
- VW Transporter
- Peugeot Expert
- Houses per fill
- 28–303-bed semis
- Min. payload
- 1000kg
Suits vans like
- Citroën Dispatch
- Renault Trafic
- Vauxhall Vivaro
- Ford Transit Custom
- Mercedes Vito
- VW Transporter
- Peugeot Expert
Houses per fill are approximate, based on three-bedroom semi-detached homes, an average flow rate and an average-paced operator. Your numbers will depend on your flow rate, working speed and the size of the properties you clean.
Professional fitting
We'll install it for you
We can fit your system at our headquarters in Telford (TF1 5ST), safely and professionally.
6–8 hrsTypical fitting time
Same dayDrop off AM, collect PM
TelfordTF1 5ST
What to expect
- Drop your van off in the morning and collect it later the same day
- Fitting typically takes 6 to 8 hours
- Make a day of it – Ironbridge and Shrewsbury are close by
- Please note we don't have an on-site waiting area
Backed by Cleanlynk
WARRANTY & SUPPORT THAT KEEPS YOU WORKING
12-month warranty
Every system is covered against manufacturing defects on all included components.
Mon–Sat, 7am–6pm
Technical support by phone or email from people who use this kit every day.
Video call fault-finding
We'll diagnose faults and walk you through any repairs over a video call.
Every spare in stock
We stock all replaceable components, so you're never left waiting on parts.
Our brand new & improved CLEANLYNK FOUNDATION van mounted water fed pole systems feature a fully welded stainless steel tank retaining frame, upgraded 100ah 12V lithium leisure battery & improved pump and controller panel.
System includes:
- 1 x Wydale Plastics 500L water tank with 9" vented lid and 1" BSP F outlet
- 1 x Cleanlynk Stainless Steel fully welded water tank retaining frame
- 1 x Hose reel (choice of manual or electric)
- 1 x 100M 6MM microbore hose
- 1 x Pentair Shurflo 5 LPM 100 PSI 12V water pump
- 1 x Cleanlynk x Spring Europe V16 12V digital pump controller
- 1 x 12V 100ah lithium leisure battery
- All necessary hose & fittings
Optional extras available include:
- UPOL RAPTOR waterproof floor coating (vehicle required for 4 days to allow for curing)
- Battery to battery charger
- Through floor hose rollers
- Pole rack
- Bumper mounted working ports
- Diesel water heater system
- On-board DI or RO/DI system
Our assemble & send DIY install packages are supplied fully prepared and ready to fit.
Each package includes full assembly of the tank retaining frame, mounting of the pump and controller board in your preferred position, and complete setup of the hose reel with hose and fittings. All electrical wiring and plumbing are finished before dispatch, so everything arrives pre built and tested.
Selecting pre assembly of your system can save up to 6 hours of installation time, while ensuring you receive the correct hardware for a safe and secure install.
We also include a comprehensive fixings pack containing high tensile strength bolts, nyloc nuts, and a selection of spreader plates to suit common van floors.
Phone support is available on assemble and send packages if you need guidance during installation, giving you added confidence from start to finish.
Please note: CleanLynk takes no responsibility for the manner in which DIY window cleaning systems are fitted or mounted into vans or vehicles. It is the responsibility of the user to ensure that all installations are conducted safely, securely, and in accordance with any applicable regulations or manufacturer guidelines.
Images shown are representative of the FOUNDATION systems CLEANLYNK supply and install and do not necessarily depict the exact system listed.
FAQs
Window cleaning system questions
The questions we're asked most before someone buys their first or next system. Can't see yours? Get in touch.
Not sure which system you need?
Tell us about your round and your van — we're working window cleaners and we'll help you spec the right setup.
What type of window cleaning system is best for beginners?
For anyone seriously starting out in the window cleaning industry, we generally recommend beginning with a basic cold water "delivery only" van mounted water fed pole system.
This setup includes a securely mounted pure water storage tank, connected to a 12V water pump and pump controller, which feeds a hose reel and ultimately your water fed pole. Instead of generating pure water yourself using an onboard RO/DI system, you simply fill the tank at a pure water filling station.
What size vehicle do I need to fit a mounted water fed pole system?
The size of vehicle required will depend on the capacity of the water storage tank you choose. As a general guide, we recommend the following:
350L/400L: Minimum 600kg payload, e.g. Citroën Berlingo, Renault Kangoo, Peugeot Partner, Ford Transit Connect, Vauxhall Combo, VW Caddy or Mercedes Citan.
500L: Minimum 700kg payload, e.g. Citroën Dispatch, Renault Trafic, Vauxhall Vivaro, Ford Transit Custom, Mercedes Vito, VW Transporter or Peugeot Expert.
650L/800L: Minimum 1000kg payload, e.g. Citroën Dispatch, Renault Trafic, Vauxhall Vivaro, Ford Transit Custom, Mercedes Vito, VW Transporter or Peugeot Expert.
How many houses can I clean with a full tank?
It's a common question, but one that doesn't have a one-size-fits-all answer.
The number of jobs you can complete depends on several factors, including your chosen flow rate, your working speed, and the size of the properties you're cleaning. However, based on an average flow rate and an average-paced operator, the following guidelines can be used:
- 350L/400L: approximately 18–20 three-bedroom semi-detached homes.
- 500L: approximately 22–25 three-bedroom semi-detached homes.
- 650L/800L: approximately 28–30 three-bedroom semi-detached homes.
Can you install the window cleaning system for me?
Yes, absolutely! We can install your system at our headquarters in Telford (TF1 5ST).
Installation typically takes around 6 to 8 hours, allowing us to fit the system safely and professionally.
Telford and the surrounding Shropshire area offer plenty of beautiful places to explore, including Ironbridge and Shrewsbury, so we often recommend making a day of it. Simply drop your van off in the morning and collect it later the same day.
Please note we do not have an on-site waiting area.
Do you provide a warranty or technical support?
Yes, absolutely. All our systems come with a 12 month warranty covering any manufacturing defects on included components.
For technical support, we're available Monday to Saturday, 7am to 6pm, by phone or email. We're also happy to provide video call support for fault diagnosis and walk-through guidance for any necessary repairs.
In addition, we stock all replaceable components for our water fed pole systems, so you'll always have the backup and parts availability you need to keep your system running smoothly.